IronFin HH-IF-16 Hydraulic Ironworker — 66 Ton
Machines are quoted to your configuration — call Hammerhead Industrial or send the form below.
IronFin — built for US fabrication shops, backed by Hammerhead Industrial service and parts support. Request a quote for configuration, controller, and electrical options.
Key features
- Five stations: punching, flat-bar shearing, angle shearing, section/channel shearing and notching
- Dual-cylinder hydraulic design for independent stations
- Compact footprint for fab and maintenance shops
Specifications
| Punching force | 60 t (66 US tons) |
|---|---|
| Max plate thickness | 16 mm (5/8 in) |
| Material strength | ≤ 450 N/mm² |
| Shearing angle | 7° |
| Flat bar capacity (T x W) | 16 x 250 mm / 8 x 400 mm |
| Slide stroke | 80 mm (3.1 in) |
| Stroke rate | 9–25 /min |
| Throat depth | 300 mm (11.8 in) |
| Max punch diameter | 25 mm (1.0 in) |
| Channel capacity | 126 x 53 x 5.5 mm |
| Main motor | 5.5 kW |
| Approx. footprint L x W x H | 1640 x 730 x 1770 mm |
| Reference model | Q35Y-16 |
Available options
- Punch & die sets
- Special tooling for pipe, round and square bar
Specifications are nominal and may vary by configuration. Electrical supply, controller, and options are confirmed on your quote.
Configure your machine
Pick a model, then send it with your quote request. Controller, electrical supply and options are confirmed on your quote.